indybama
RCC Addict
Subscribed Member
- Joined
- Nov 26, 2017
- Messages
- 1,823
- Location
- Lineville
- Mar 4, 2019
- #41
I was just textn my dad n showin him pics of my leaf sprung project n my monster truck project n got on the subject of locktite on bolts. He said not to use locktite on them, it could cause them to strip or break off. So far, knock on wood, i havent had that problem. But he said use pepto bismol as locktite alternative. I never woulda thought of that. Wen it dries, it does turn to a chalky paste kinda like locktite does. Might b worth a try. Shoot, a bottle of pepto would last forever as a locktite alt. Plus if u feel sick workin on your tiny trucks, just take a swig lmbo
Sent from my SM-J327VPP using Tapatalk
JatoTheRipper
Moderator
Moderator
- Joined
- Sep 25, 2008
- Messages
- 14,010
- Location
- PA
- Mar 5, 2019
- #42
indybama said:
I was just textn my dad n showin him pics of my leaf sprung project n my monster truck project n got on the subject of locktite on bolts. He said not to use locktite on them, it could cause them to strip or break off. So far, knock on wood, i havent had that problem. But he said use pepto bismol as locktite alternative. I never woulda thought of that. Wen it dries, it does turn to a chalky paste kinda like locktite does. Might b worth a try. Shoot, a bottle of pepto would last forever as a locktite alt. Plus if u feel sick workin on your tiny trucks, just take a swig lmbo
Sent from my SM-J327VPP using Tapatalk
Blue thread lock is fine on RCs.
Some people also use nail polish as an alternative to Loctite.
HumboldtEF
Tiny truck hoarder
Lifetime Gold Baby!
- Joined
- Jun 25, 2017
- Messages
- 4,527
- Location
- Humboldt county
- Mar 5, 2019
- #43
I was gonna say the same thing, Blue (or medium) is fine for RC but dont use the red as its intended to be permanent and requires heat for removal. Though your fathers idea for an alternative threadlock is still pretty cool and definitely unique "thumbsup"
More info on the different kinds of Loctite here The Difference Between Red, Blue, Green and Purple Threadlockers - Henkel Adhesive Technologies Blog
Last edited:
Voodoobrew
I wanna be Dave
- Joined
- Feb 19, 2017
- Messages
- 2,128
- Location
- My mothers basem*nt
J
jchammbone
Newbie
- Joined
- Oct 11, 2006
- Messages
- 25
- Location
- Emporia
- Mar 19, 2019
- #45
To add to High Plains post with the "bearing" cleaner jig...
I use an old pickle jar to catch the "used" bearing spray, over time it will fill up if you keep lid on tight , then if I needed to clean some excess grease/oil up I can dip a corner of rag in my jar instead of grabbing the "new" can of cleaner.
Re use it so to speak.
B
BashNSlash
Quarry Creeper
- Joined
- Aug 27, 2018
- Messages
- 430
- Location
- Toronto, Canada
- Jul 8, 2019
- #46
I use a chop stick to help remove and test bearings [emoji1787] Both ends are different sizes, so it works for almost any size of standard rc bearing.
chevellian
Rock Crawler
- Joined
- Sep 2, 2006
- Messages
- 787
- Location
- Lititz
- Sep 8, 2019
- #47
Small hole gauges work nicely to remove bearings from blind bores.
D
DutchTerror
Newbie
- Joined
- Sep 15, 2019
- Messages
- 14
- Location
- Channahon
- Nov 4, 2019
- #48
I was just thinking yesterday how much extra functionality I've gotten out of my hot air rework station. It's just a cheap unit, but I used it for a bunch of different stuff:
Shrinking heat shrink tubing - 150°F
Flashing off fresh paint, including spray paint and modeling acrylics - 120°F
Melting small hairs and stubs on 3D prints - 210°F
Warming 3D printed pieces to add bends/shaping - 190-220°F
Decals that have wrinkles or edges that won't quite stick down, hit them with a bit of air, then hold the decal in place for 20 seconds - 120°F
This is the unit I bought:
https://www.amazon.com/gp/product/B01MR2IWBN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
AnimalHippie
RCC Addict
- Joined
- Mar 27, 2018
- Messages
- 1,214
- Location
- Ocala, Florida, USA
- Nov 4, 2019
- #49
I've found that my used shock oil is perfect drilling lubricant. Saved my bits while drilling stainless steel using it.
S
Screwfly
Rock Stacker
- Joined
- Jul 3, 2019
- Messages
- 78
- Location
- Bullard, TX
- Nov 13, 2019
- #50
indybama said:
I was just textn my dad n showin him pics of my leaf sprung project n my monster truck project n got on the subject of locktite on bolts. He said not to use locktite on them, it could cause them to strip or break off. So far, knock on wood, i havent had that problem. But he said use pepto bismol as locktite alternative. I never woulda thought of that. Wen it dries, it does turn to a chalky paste kinda like locktite does. Might b worth a try. Shoot, a bottle of pepto would last forever as a locktite alt. Plus if u feel sick workin on your tiny trucks, just take a swig lmbo
Sent from my SM-J327VPP using Tapatalk
I was looking to cross train to be an jet engine mech on A-10s, and the engine shop used milk of magnesia for thread locker on the jet engines. I was pretty shocked by that.
JacktheRipper
Quarry Creeper
- Joined
- Dec 1, 2019
- Messages
- 257
- Location
- Woodstock
- Dec 9, 2019
- #51
dr frankenstyle said:
I guess I AM old skool, I still use these. :lmao:
But they WORK. :roll:
See Also↓ Episode 152 – Your RV Refrigerator Just Died! What do You Do, Have Funeral? Punt? Maybe Neither! -8)
How about the same deal, with a twist
Pep
Attachments
JacktheRipper
Quarry Creeper
- Joined
- Dec 1, 2019
- Messages
- 257
- Location
- Woodstock
- Dec 31, 2019
- #52
Welding requires one to acquire many clamps. Half of all welding projects is figuring out how to hold stuff, This also goes for RC building, so simple clamp set can be made using clothespins.
Pretty sure this not a new idea, but for others that may not have though about it, a picture.
Also seen a lazy susan, great for painting
pep
Attachments
P
Panther6834
I wanna be Dave
- Joined
- Sep 28, 2019
- Messages
- 2,409
- Location
- US
- Jan 1, 2020
- #53
JacktheRipper said:
Welding requires one to acquire many clamps. Half of all welding projects is figuring out how to hold stuff, This also goes for RC building, so simple clamp set can be made using clothespins.
Pretty sure this not a new idea, but for others that may not have though about it, a picture.
Also seen a lazy susan, great for paintingpep
Good use of clothespins. Should we start calling them "scale clamps"?
~ More peace, love, laughter & kindness would make the world a MUCH better place
JacktheRipper
Quarry Creeper
- Joined
- Dec 1, 2019
- Messages
- 257
- Location
- Woodstock
- Jan 1, 2020
- #54
Scale clamps ........... 10 for 25 bucks, power coating extra.
What's funny, everyone has these goofy helpers used for building. Some are usable, interesting, some only the inventor understands. :lmao:
pep
M
MaX-D
RCC Addict
- Joined
- Sep 11, 2014
- Messages
- 1,229
- Location
- Ft. Lauderdale, Florida
- Jan 15, 2020
- #55
JatoTheRipper said:
I started using gun lube like Ballistol or Hornady One Shot on my CVDs / universals. If it's good enough for the friction in guns it's good enough for my RCs. It also is relatively dry so things don't stick to it.
Oh......this is a good one. I use Hornady One Shot gun lube. I'm going to try this .
Sent from my LM-G710VM using Tapatalk
C
Crush
Newbie
- Joined
- Jun 4, 2011
- Messages
- 16
- Location
- Rohnert Park
- May 3, 2020
- #56
Soldering iron to heat grub screws when Loctite was used. A rubber band around plier handle to use as a clamp. Plano tackle box as a toolbox .
T
T Bone 347
Rock Stacker
- Joined
- Jan 11, 2011
- Messages
- 61
- Location
- Columbus
- Jul 8, 2020
- #57
JB Weld...for lexan body?!?!?!
I have a few areas that cracked or broke, applied some JB weld, inside and out, now I have a nice little bondo patch along the bottom of the door.
It's functional and pleasing to look at on the old Blue Honcho.
S
ScaleLifeNewbie
I wanna be Dave
- Joined
- Jun 28, 2020
- Messages
- 2,010
- Location
- The Big Island
- Oct 1, 2020
- #58
Soldering iron to burn rust holes in body. Yes, I use a completely different tip when I solder
Also used my chassis stand to put my body on and spin it to paint!
Sent from my iPad using Tapatalk
V
VR6 BeelzeDub
Quarry Creeper
- Joined
- Dec 26, 2015
- Messages
- 211
- Location
- NY
- May 11, 2021
- #59
JacktheRipper said:
How about the same deal, with a twist
Pep
Where can I get one of these?????? What are they called?
Great thread by the way so BUMP!
B
Benp
Rock Crawler
- Joined
- Apr 26, 2020
- Messages
- 656
- Location
- Northern MN
- May 13, 2021
- #60
A chain saw raker file for filing the depth gauges on the chain.
Around 6” long and sharp.
I use it to open the holes on one side of a servo for mounting on my Trx4. Only takes a few licks.
I also use it to sharpen my splitting axes as well. Takes a lot of metal off very smoothly.
Pferd is the actual brand I use.
You must log in or register to reply here.